Our replacement locators are available in a packs of 10 to include male and female parts complete. Please note we are unable to sell either part separately.
Stand 19mm from the wall and are used 99% of the time for all types of flat cut letters.
Female - 17mm high, top diameter 11mm, base diameter 9.5mm, hole 6.5mm diameter.
Male - 15mm high, top diameter 6.5mm, base diameter 13mm.
PLEASE NOTE WITH IMPORTANCE: BHMA bear no responsibility where brands are mismatched. Different brands of plastic locator should never be used together, no matter how well they appear to suit each other as they have not been tested by the manufacturers for compatibility. Although brands can appear similar to each other, they will vary in size and material. Unforeseen factors where different brands have been used together such as temperature fluctuations, adhesion, fitting & install etc can cause product failure.
Please ensure the base of the male part is cleaned with scotchbrite to remove any silicon coating that may remain from the manufacturing process in order to aid adhesion.
Do not over-tighten When fixing the cup (female part), always allow room for expansion in warmer temperatures. Over-tightening may cause the cup to split and the product to fail.
|Approx. Height (mm)||-|
|Approx. Width (mm)||-|
|Approx. Depth (mm)||-|
|Approx. Length (m)||-|
|Country of Manufacture||-|
|Data Sheet||Data Sheet Not Available|