Our replacement locators are available in a packs of 10 to include male and female parts complete. Please note we are unable to sell either part separately.
Stand 23mm from the wall and are mainly used on larger MDF and acrylic flat cut lettering.
Female - 22mm high, top diameter 18.5mm, base diameter 14mm, hole 10mm diameter.
Male - 15mm high, top diameter 10mm, base diameter 19mm.
PLEASE NOTE WITH IMPORTANCE: BHMA bear no responsibility where brands are mismatched. Different brands of plastic locator should never be used together, no matter how well they appear to suit each other as they have not been tested by the manufacturers for compatibility. Although brands can appear similar to each other, they will vary in size and material. Unforeseen factors where different brands have been used together such as temperature fluctuations, adhesion, fitting & install etc can cause product failure.
Please ensure the base of the male part is cleaned with scotchbrite to remove any silicon coating that may remain from the manufacturing process in order to aid adhesion.
Do not over-tighten When fixing the cup (female part), always allow room for expansion in warmer temperatures. Over-tightening may cause the cup to split and the product to fail.
|Approx. Height (mm)||-|
|Approx. Width (mm)||-|
|Approx. Depth (mm)||-|
|Approx. Length (m)||-|
|Country of Manufacture||-|
|Data Sheet||Data Sheet Not Available|